Fiziksel Port
Power over Ethernet
Layer 2 Özellikler
Şasi ve Kurulum
| Interfaces | |
| PoE IN |
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE “Data + DC power” in auto MDI/MDI-X, auto-negotiation RJ45 connector |
| PoE OUT |
2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC power” out auto MDI/MDI-X, auto-negotiation RJ45 connector |
| Power over Ethernet | |
| PoE Standard |
“PoE In” Port IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD Per “PoE Out” Port IEEE 802.3at Power over Ethernet Plus end-span PSE IEEE 802.3af Power over Ethernet end-span PSE |
| PoE Power Supply Type | End-span (Type A) |
| PoE Power |
“PoE In” Port 52~56V DC, max. 30.8 watts Per “PoE Out” Port 44~55V DC, max. 25 watts |
| Power Pin Assignment |
“PoE In” Port 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) Per “PoE Out” Port 1/2 (+), 3/6 (-) |
| Hardware Specifications | |
| Data Rate | 10/100/1000Mbps |
| MAC Address Table | 2K |
| Data Buffer | 2Mbits |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 6Gbps |
| Switch Throughput | 4.46Mpps @ 64 bytes |
| Jumbo Frame | 10KB |
| Flow Control |
IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| LED Indicators |
“PoE In” Port: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) “PoE Out” Port 1: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) “PoE Out” Port 2: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) |
| Protection |
ESD (Ethernet): 2KV (TBD) Surge (EFT for power) : 2KV (TBD) |
| Enclosure | Metal |
| Installation | Wall mountable |
| Dimensions (W x D x H) | 140 x 77 x 28 mm |
| Weight | 234g |
| Power Requirements | IEEE 802.3at compliant with voltage within 52V-56V DC |
| Power Consumption |
1.6 watts/5.5BTU (System on with PoE input) 2.2 watts/7.5BTU (Ethernet full loading without PoE function) 36 watts/122.8BTU (Full loading with PoE function) |
| Network Cable |
10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, 328ft) |
| Standard Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Standard Compliance |
IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3x Flow Control |
| Environment | |
| Operating |
Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage |
Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
